ESM0R21  |IPC Solutions|I/O Products|Other Products


mSATA to 2.5'' SATA RAID Drive


* 6Gbps SATA III H/W RAID Controller
* Convert 2x M.2 NGFF SATA based SSD to standard 2.5” 7mm SATA drive
* Supports SATA I, SATA II, SATA III Host port
* Supports SATA hot plug and booting
* Supports 6Gbps, 3Gbps SATA based M.2 NGFF 80/60/42/30 mm SSD
* M.2 NGFF type 2280-D5-B B Key Socket on board
* Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD
* Supports dual-sided SSD module 1.5mm component height on the top and bottom side
* Supports H/W RAID 0, RAID1, SPAN (Big Drive) and PM (2Drives) Modes
* Not support PM (2Drives) Mode if SATA I or no Port Multiplier compatible SATA Host connection
* 22 pin SATA (Signals and Power) male connector on board
* 2x M.2 SSD ACT LED
* Transparent to the operating system, no driver required on Windows, Mac and Linux
* Hardware Jumper and Windows & Mac software GUI configure RAID modes
* Provides Windows and Mac GUI to configure RAID modes and monitor RAID status
* Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws
* PCIe NVMe & AHCI M.2 M Key SSD can NOT work with this M.2 B Key socket


Model Name ESM0R21
Key Type

mSATA to 2.5"SATA Raid Drive

Form Factor


Chipset ID

Jmicron JMS562

Number of Ports

mSATA x2


100.45mm x 69.85mm x 7mm

Operating Temp.

-10°C~ 80°C

OS Compatibility

Windows, MAC and Linux


Add to cart

Faded Short Sleeve T-shirts


mSATA to 2.5'' SATA RAID Drive